SparkFun Accesorios SparkFun

Resultados: 915
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CLP) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun This is a USB 2.0 type B to Micro-B 5-pin black cable. You know the mini-B connector that usually comes with cell phones Cameras MP3 players etc. We specifically like these 6" long cables because using USB peripherals in projects within a small e 11En existencias
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator contained in a handy surface mount package. Requires two external resistors to 97En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Electret Microphone 28En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines.Features:2.7V to 22En existencias
Min.: 1
Mult.: 1
Accessories Analog to Digital Converters - ADC
SparkFun Accesorios SparkFun Rocker Switch SPST (right-angle) 25En existencias
Más información disponible
Min.: 1
Mult.: 1

Switches
SparkFun Accesorios SparkFun This is a simple knob that connects to the extra large sized linear slide potentiometer. Each knob uses friction to secure itself to fit onto the slide pot. Once attached this small knob provides you with an easier to use potentiometer for your proj 7En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun We all know that you can never get too many LEDs. Don't worry we've got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice reusable ESD safe bag. Make that next project shine!Features:25 super bright red LEDs9 000mcd brightne 2En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun The new generation 18 pin PICAXE microcontroller now has parallel tasking touch sensors and more memory/RAM.See the Info Sheet for a comparison of features between the 18M2 and the 18M2+PICAXE is a neat entry-level microcontroller system that is rel 25En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a basic 4-digit 7-segment display - white in color. It has a common anode. The display features one decimal point per digit and individually controllable apostrophe and colon points.The LEDs have a forward voltage of 1.9VDC and a max forwar 2En existencias
Min.: 1
Mult.: 1
Displays 7-Segment Display
SparkFun Accesorios SparkFun Heating Pad - 5x10cm
Hoja de datos
12En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun 1.0M Ohm 1/4th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones). Note: Sold as singles. But check below fo 128En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Optoelectronics LED - Yellow with Resistor
SparkFun Accesorios SparkFun Polarized Connectors Header (4-Pin) 203En existencias
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun Accesorios SparkFun Screw Terminals 5mm Pitch (3-Pin)
Hoja de datos
13En existencias
Min.: 1
Mult.: 1

Connectors Fixed Terminal Blocks
SparkFun Accesorios SparkFun Audio Jack Breakout Jack Breakout 49En existencias
Min.: 1
Mult.: 1

Breakout Boards
SparkFun Accesorios SparkFun This is the SMD version of PRT-07948 which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is con 17En existencias
Min.: 1
Mult.: 1
Battery Holders Battery Holder - Coin Cell
SparkFun Accesorios SparkFun This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now but never the female. Now you have the ability to get both!Pins have 0.1" spacing between rows and between pins.Docu 5En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace and with these cables you will be able to easily incorporate th 9En existencias
Min.: 1
Mult.: 1

Test & Measurement Alligator Clip with Pigtail
SparkFun Accesorios SparkFun LED - Basic Red 3mm 54En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a black plastic bezel custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these bezels with two of the top bezels will create a 4x4 bezel appropriate for the full button pad.Documents:DimensionalMulti-Unit
Hoja de datos
13En existencias
4En pedido
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Rotary Encoder
Hoja de datos
13En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard green LED. The lens is 3mm in diameter and is diffused.Features:2.0-2.4 VDC forward dropMax current: 2 14En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun We all know that you can never get too many LEDs. Don't worry we've got you covered. This is a pack of basic red and yellow LEDs (10 of each) all conveniently packaged in a nice reusable ESD safe bag.Includes:10x - Basic Yellow10x - Basic RedDocumen 18En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun Potentiometers are incredibly useful whether you're controlling the volume on your stereo or the 'mood lighting' in your room. The problem with traditional potentiometers is the fact that your microcontroller doesn't have an easy way to interface wi 5En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:520-525nm Green3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle150-180 MCD outputDocuments:[Datasheet](h 62En existencias
Min.: 1
Mult.: 1
Optoelectronics LED