SparkFun Accesorios SparkFun

Resultados: 915
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CLP) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Hoja de datos
32En existencias
Min.: 1
Mult.: 1

Connectors Feather Stackable Header Kit
SparkFun Accesorios SparkFun Soldering Iron Stand 5En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 120En existencias
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Hoja de datos
120En existencias
120En pedido
Min.: 1
Mult.: 1

Cables U.FL Mini Coax Cable - 200 mm
SparkFun Accesorios SparkFun These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long 1En existencias
Más información disponible
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 10-wire ribbon cable. Check th 2En existencias
Más información disponible
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun Audio Cable TRRS - 1ft 43En existencias
Min.: 1
Mult.: 1

Cables 1 Feet Long, White Color
SparkFun Accesorios SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Hoja de datos
80En existencias
Min.: 1
Mult.: 1

Cables USB A to Micro-B Cable
SparkFun Accesorios SparkFun Your basic 7-segment LED. Common anode. Two decimal points but only the one on the right is wired. Digit height is 0.6". Overall height is 1"Documents:Datasheet Arduino Library (Thanks Derek!) 20En existencias
Min.: 1
Mult.: 1
Displays 7-Segment Display
SparkFun Accesorios SparkFun These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for reed s 9En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin GND to the other and the center pin will have a voltage that varies from 0 to VCC depending on the rotati 161En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (3 POS,M)
Hoja de datos
14En existencias
Min.: 1
Mult.: 1

Connectors Male FCI Clincher Connector with 3 Position
SparkFun Accesorios SparkFun This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification. 65En existencias
Min.: 1
Mult.: 1
Battery Holders Battery Holder - Coin Cell
SparkFun Accesorios SparkFun FTDI Cable 5V VCC-3.3V I/O 23En existencias
Min.: 1
Mult.: 1

Cables USB Cables / IEEE 1394 Cables
SparkFun Accesorios SparkFun This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying 11En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 8-pin socket. 516En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Arduino Stackable Header - 8 Pin 1.056En existencias
500En pedido
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty j 4En existencias
Más información disponible
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug 1 female plug plus pins to connect them both. The pins crimp to your cable 32En existencias
Más información disponible
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun Resistor 10K Ohm 1/4 Watt PTH - 20 pk 213En existencias
Min.: 1
Mult.: 1

Resistors Resistor 10K Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
SparkFun Accesorios SparkFun This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
Hoja de datos
45En existencias
Min.: 1
Mult.: 1

Connectors Header - 2 x 5 Pin, Male
SparkFun Accesorios SparkFun The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p
Hoja de datos
74En existencias
Min.: 1
Mult.: 1
Connectors 80-pin micro:bit Edge Connector
SparkFun Accesorios SparkFun These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 6En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 15En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector center positive. This cable allows the user to use a USB port on a computer laptop or on our cigarette power supply to provide our development boards with 5V.The US 10En existencias
Min.: 1
Mult.: 1
Adapters