SparkFun Accesorios SparkFun

Resultados: 915
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CLP) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come with black red and white cable 14En existencias
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun Thermocouple Type-K Glass Braid Insulate 55En existencias
Min.: 1
Mult.: 1

Wire & Cable
SparkFun Accesorios SparkFun This is a stainless steel Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals connecting them at the two ends and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one). 17En existencias
21En pedido
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is your basic tube of unleaded (Pb-free) solder with a no clean water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper 10En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas. 11En existencias
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth Nordic or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You 20En existencias
Min.: 1
Mult.: 1
Adapters
SparkFun Accesorios SparkFun These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long 1En existencias
Más información disponible
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 10-wire ribbon cable. Check th 3En existencias
Más información disponible
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun Audio Cable TRRS - 1ft 43En existencias
Min.: 1
Mult.: 1

Cables 1 Feet Long, White Color
SparkFun Accesorios SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Hoja de datos
82En existencias
Min.: 1
Mult.: 1

Cables USB A to Micro-B Cable
SparkFun Accesorios SparkFun Your basic 7-segment LED. Common anode. Two decimal points but only the one on the right is wired. Digit height is 0.6". Overall height is 1"Documents:Datasheet Arduino Library (Thanks Derek!) 20En existencias
Min.: 1
Mult.: 1
Displays 7-Segment Display
SparkFun Accesorios SparkFun These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for reed s 11En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin GND to the other and the center pin will have a voltage that varies from 0 to VCC depending on the rotati 161En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (3 POS,M)
Hoja de datos
14En existencias
Min.: 1
Mult.: 1

Connectors Male FCI Clincher Connector with 3 Position
SparkFun Accesorios SparkFun This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification. 65En existencias
Min.: 1
Mult.: 1
Battery Holders Battery Holder - Coin Cell
SparkFun Accesorios SparkFun FTDI Cable 5V VCC-3.3V I/O 26En existencias
Min.: 1
Mult.: 1

Cables USB Cables / IEEE 1394 Cables
SparkFun Accesorios SparkFun This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying 21En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Carrier Boards Weather:bit
SparkFun Accesorios SparkFun Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 8-pin socket. 519En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Arduino Stackable Header - 8 Pin 1.066En existencias
500En pedido
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty j 4En existencias
Más información disponible
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug 1 female plug plus pins to connect them both. The pins crimp to your cable 32En existencias
Más información disponible
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun Resistor 10K Ohm 1/4 Watt PTH - 20 pk 213En existencias
Min.: 1
Mult.: 1

Resistors Resistor 10K Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
SparkFun Accesorios SparkFun This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
Hoja de datos
45En existencias
Min.: 1
Mult.: 1

Connectors Header - 2 x 5 Pin, Male
SparkFun Accesorios SparkFun The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p
Hoja de datos
74En existencias
Min.: 1
Mult.: 1
Connectors 80-pin micro:bit Edge Connector